DT390
3. Enter a name and press Save to save the setting.
14.6
Changing Answering Method
The phone can be set to answer a call automatically when a headset is used, or
to answer a call by a press on any key.
You can also change the answering behavior to:
•
•
14.6.1
Normal Answering
The answering behavior is by default set to
doing the following:
1. Press Menu, select Settings, and press Select.
2. Select Answering, and press Select.
3. Select Answering key, and press Select.
4. Select Any key and press Select.
5. Press Back to save the setting.
14.6.2
Automatic answer
Note: Automatic answer mode is relevant when a headset is connected.
To set the phone to answer an incoming call automatically, do the following:
1. Press Menu, select Settings, and press Select.
2. Mark Answering, and press Select.
3. Mark Answer behaviour, and press Select.
4. Mark Automatically and press Change to activate the automatic mode.
5. Press Back to save the setting.
All incoming calls will be connected automatically when this behavior is
selected.
To remove the setting, press Change.
Note: You can also set the answering behavior to automatically connect
76
Use Loudspeaking function directly when
Automatically connect incoming call in Loudspeaker, without pressing any
key.
incoming call in loudspeaker, see Section 14.6.3 on page 77.
is pressed.
. It can be set to any key by
1424-EN/LZT 103 087 Uen A3 2008-11-21