Changing The Owner Id; Changing Answering Methods - Aastra DT390 User Manual

16.4.5
16.5
16.6
16.6.1
1424-EN/LZT 103 087 Uen F2 2012-03-02
7. Press Back to save the setting.
Changing PIN Code
To change PIN code, do the following:
1. Press Menu, select
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Change PIN code and press Select.
5. Enter the old PIN code (default is 0000) and press OK.
6. Enter the new PIN code.
7. Enter the new PIN code again to confirm and press Save.
The following message is displayed: New PIN code saved.

Changing the Owner ID

The Owner ID is set to identify the phone. To change the owner ID, do
the following:
1. Press Menu, select
2. Select Owner ID, and press Select.
3. Enter a name and press Save to save the setting.

Changing Answering Methods

The phone can be set to answer a call automatically when a headset is
used, or to answer a call by a press on any key.
You can also change the answering behavior to:
• use Loudspeaking directly when
• automatically connect incoming call in Loudspeaking mode,
without pressing any key.
Normal Answering
The answering behavior is set to Hook-off by default. You can set it to
any key by doing the following:
, and press Select.
, and press Select.
is pressed.
S
ETTINGS
90