Changing Answering Methods; Normal Answering - Aastra DT390 User Manual

16.6
16.6.1
16.6.2
1424-EN/LZT 103 087 Uen G 2014-04-14
3. Enter a name and press Save to save the setting.

Changing Answering Methods

The phone can be set to answer a call automatically when a headset is
used, or to answer a call by a press on any key.
You can also change the answering behavior to:
• use Loudspeaking directly when
• automatically connect incoming call in Loudspeaking mode,
without pressing any key.

Normal Answering

The answering behavior is set to Hook-off by default. You can set it to
any key by doing the following:
1. Press Menu, select
2. Select Answering, and press Select.
3. Select Answering key, and press Select.
4. Select Any key and press Select.
5. Press Back to save the setting.
Automatic Answer (Headset Mode)
Note: The automatic answer mode is only relevant when a headset is
connected.
To set the phone to answer automatically, do the following:
1. Press Menu, select
2. Select Answering, and press Select.
3. Select Answer behaviour, and press Select.
4. Select Automatically and press Change to activate the automatic
mode.
5. Press Back to save the setting.
All incoming calls will be connected automatically when this
behavior is selected.
To remove the setting, press Change.
is pressed.
, and press Select.
, and press Select.
S
ETTINGS
94