Put A Call On Hold; Call Waiting - Aastra DT390 User Manual

8.7

Put a Call on Hold

An ongoing call can temporarily be put on hold. Calls put on hold can be
retrieved to your own or on another phone. To put a call on hold, do the
following:
To put a call on hold, do the following:
1. Press R.
Wait for dial tone.
2. Press
8.7.1 Resume the call
To resume the call, do the following:
1. Press
If not resumed within 30 seconds you will be called back. An unanswered
external call will be rerouted to the operator after another 30 seconds.
8.7.2 Resume on Another Extension
To resume the call on another extension:
1. Call the extension where the call was put on hold and press
2. Press 8.
Note: France and New Zealand, press 4; Sweden, press 6.
8.8

Call Waiting

Note: The Call Waiting function might be blocked for use on your extension.
If you hear the Call Waiting tone during an ongoing conversation, another
person is trying to contact you. To answer the call, do the following:
1. Press R and
The ongoing call is put on hold and your phone rings to announce the waiting
call.
2. Press
1424-EN/LZT 103 087 Uen A3 2008-11-21
.
within 30 seconds.
This is programmed via the Desk PDM/CPDM by your system
administrator.
.
Note: R is default for this function. If this soft key is reprogrammed to
something other than R, this function is disabled.
.
During Calls
.
47