Changing Answering Method; Normal Answering; Automatic Answer - Aastra DT690 User Manual

17.6

Changing Answering Method

The phone can be set to answer a call automatically when a headset is
used, or to answer a call by a press on any key.
You can also change the answering behavior to:
17.6.1

Normal Answering

The answering behavior is by default set to Off-hook. It can be set to any
key by doing the following:
17.6.2

Automatic Answer

Note:
To set the phone to answer automatically, do the following:
To remove the setting, press Change.
1424_EN_LZT103088 Rev B1 2009-05-20
3. Enter a name and press Save to save the setting.
•
Use Loudspeaking function directly when
•
Automatically connect incoming call in Loudspeaker, without
pressing any key.
1. Press Menu, select Settings, and press Select.
2. Select Answering, and press Select.
3. Select Answering key, and press Select.
4. Select Any key and press Select.
5. Press Back to save the setting.
The automatically answer mode is only relevant when a headset
or a Bluetooth headset is connected.
1. Press Menu, select Settings, and press Select.
2. Mark Answering, and press Select.
3. Mark Answer behaviour, and press Select.
4. Mark Automatically and press Change to activate the automatic
mode.
5. Press Back to save the setting.
All incoming calls will be connected automatically when this
behavior is selected.
is pressed.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
90