Monitoring Signaling Bits - HP OMNIBER 718 37718A User Manual

Description
2.048 Mb/s
Results
DS1 Results
Making Measurements

Monitoring Signaling Bits

Monitoring Signaling Bits
The HP 37718A receiver can be used to monitor the state of signaling
bits in received 2 Mb/s signals with timeslot-16 CAS multiframing
(PCM30 or PCM30CRC) and DS1 structured signals.
For 2 Mb/s signals with timeslot-16 CAS multiframing a table showing
the values of A,B,C,D signaling bits in all 30 channels is given.
D4 and SLC-96 payloads
A table simultaneously showing the state of the A and B signaling bits in
the 6th and 12th frames of a superframe is given. Each frame contains
24 timeslots. In SLC-96 mode A and B choices are 0, 1 or alternating. If
you set bit A or B to alternate, the displayed bit changes to an A, to
indicate that the bit is alternating from 1 to 0. The same signaling is
transmitted in all channels.
ESF Payloads
A table simultaneously showing the state of the A, B, C and D signaling
bits in the 6th, 12th, 18th and 24th frames of a superframe is given.
Each frame contains 24 timeslots.
76