HP OMNIBER 718 37718A User Manual page 175

N OT E
Selecting and Using "Other" Features
Running Self Test
4 Press
RUN/STOP
will be displayed.
The information pertaining to TEST TYPE, TEST NUMBER and
SUBTEST NUMBER will change as the Self Test progresses.
If the HP 37718A is functioning correctly, after a time of 2 to 3minutes,
TEST STATUS PASSED is displayed.
If TEST STATUS [FAIL nnn] is displayed, the HP 37718A should be
returned to a service office for repair.
Each individual self test requires unique loopback connections. To obtain
a list of the connections required move the highlighted cursor to
CABLING INFO and press
display.
to activate the Self Test. TEST STATUS RUNNING
.
The Loopbacks list will appear on the
SET
165