Adding Frequency Offset To Sonet Signal - HP OMNIBER 718 37718A User Manual

Description
HOW TO:
Selecting Test Features

Adding Frequency Offset to SONET Signal

Adding Frequency Offset to SONET Signal
Frequency offset can be added to the SONET interface rate signal and to
the payload signal.
SONET Line Rate Offset
1 Choose the amount of frequency offset required.
You can set the Frequency Offset in the range -999 ppm to +999 ppm
in 1 ppm steps using
The amount of applied Frequency Offset can be varied while
measurements are taking place.
If the value of the SONET line rate offset chosen is sufficient to cause
the maximum stuff rate to be exceeded, the asynchronous payload is
offset to prevent bit errors occurring and the maximum stuff rate is
maintained. When Floating Byte 2 Mb/s is chosen, in conjunction with
SONET line rate offset, the chosen tributary will be offset as the line
rate is offset. (No pointer movements).
DECREASE DIGIT INCREASE DIGIT
and
.
31