Setting Extended Jitter Receive Interface - HP OMNIBER 718 37718A User Manual

Description:
HOW TO:
Setting the Interfaces

Setting Extended Jitter Receive Interface

Setting Extended Jitter Receive
Interface
Extended Jitter measurements are made in a jitter bandwidth of 0.1 Hz
to 25 kHz. These measurements are made at the upper end of the
standard wander frequency range and the lower end of the standard
jitter frequency range. The extended jitter receive interface is selected
with
PDH/DSn
RECEIVE
MEASUREMENT TYPE
The choices made on the jitter receive interface determine the threshold
level for determining a jitter hit. The measurement Range and the
Filters are not selectable.
1 Choose MEASUREMENT TYPE
2 Choose the HIT THRESHOLD level - if the received jitter exceeds the
value chosen a jitter hit is recorded.
or
JITTER
RECEIVE
EXTENDED
.
EXTENDED
SONET JITTER
.
19