Setting Receive Structured Payload/Test Signal - HP OMNIBER 718 37718A User Manual

Description
TIP:
HOW TO:
Selecting Test Features

Setting Receive Structured Payload/Test Signal

Setting Receive Structured Payload/Test Signal
Structured DSn Payload/Test Signal settings determine the SONET
payload or the DSn test signal to be tested.
If you wish to set the HP 37718A transmitter and receiver to the same
Payload settings, choose
1 Choose the required Test Signal rate. If N x 64 kb/s or N x 56 kb/s is
chosen, see "Setting Receive N x 64 kb/s/N x 56 kb/s Structured
Payload/Test Signal " page 42.
2 Choose the Framing pattern of the PAYLOAD.
If TEST SIGNAL 2 Mb/s is chosen,
menu. See "Dropping an External Payload/Test Signal " page 46.
If TEST SIGNAL DS1 is chosen,
See "Dropping an External Payload/Test Signal " page 46.
3 Choose the test tributary within the structured payload, under 34Mb,
8Mb, 2Mb, 64 kb or DS2, DS1, 56 kb/s.
4 Choose the PATTERN type and PRBS polarity.
OTHER
STORED SETTINGS
DROP 2 Mb/s
DROP DS1
.
COUPLED
is added to the
is added to the menu.
39