Copying Graphics Results From Instrument Store To Disk - HP OMNIBER 718 37718A User Manual

Description
HOW TO:
Using Instrument and Disk Storage

Copying Graphics Results from Instrument Store to Disk

Copying Graphics Results from
Instrument Store to Disk
You can copy Graphics Results from the instrument store to the Disk.
This is useful under the following conditions:
• If you have graphics results stored in the instrument that you wish to
prevent from being overwritten by a future measurement (only 10
store locations in the instrument)
• If you wish to retrieve the graphics results for viewing via a
spreadsheet.
1 Choose the directory to receive the graphics file. See "Accessing
Directories and Files " page 134.
2 Choose DISK OPERATION
Instrument Store number using
INCREASE DIGIT
3 Enter the filename the graphic results are to be copied to using
PREVIOUS CHAR NEXT CHAR
the pop-up keypad.
The file name can contain up to 8 alphanumeric characters.
The filename extension is fixed as .SMG.
150
FILE COPY GRAPHICS
DECREASE DIGIT
or press and use the pop-up keypad
SET
and enter the
and
.
or press twice and use
SET