Saving Configurations To Disk - HP OMNIBER 718 37718A User Manual

Description
HOW TO:
Using Instrument and Disk Storage
Saving Configurations to Disk
Saving Configurations to Disk
You can store a large number of measurement settings which are used
regularly and recall them when required.
Configurations can be stored to a file on the floppy disk. The floppy disk
can be used in other instruments which have the same option structure.
1 Set the HP 37718A to the configuration you wish to store.
1 Choose the directory in which you wish to save the HP 37718A
configuration. See "Accessing Directories and Files " page 134.
2 Choose DISK OPERATION
enter the filename using
press twice and use the pop-up keypad.
SET
The filename extension is fixed as .CNF.
The filename can contain up to 8 alphanumeric characters.
3 Choose to save the current configuration to disk.
OK
If you have entered a filename which already exists, a warning "File
exists - are you sure you wish to continue" is displayed.
If YES is selected, the configuration will be saved.
To cancel, change OK to OFF and enter new filename. See "Accessing
Directories and Files " page 134.
, FILE TYPE
SAVE
PREVIOUS CHAR NEXT CHAR
and
CONFIGURATION
or
143