Making Sonet Analysis Measurements - HP OMNIBER 718 37718A User Manual

Dsn/sonet operation
Table of Contents

Advertisement

Description
HOW TO:
TIP:
Making Measurements

Making SONET Analysis Measurements

Making SONET Analysis Measurements
G.826, M.2101, M.2110 and M.2120 analysis results are provided for all
relevant SONET error sources.
In addition the following results are provided:
Cumulative error count and error ratio
Short Term error count and error ratio
Alarm Seconds
Frequency
Pointer Values
Pointer Graph
1 Set up the receive SONET interface and payload required. See
"Setting SONET Receive Interface " page 17.
2 If required set up the SONET transmit interface and payload. See
"Setting SONET Transmit Interface " page 4.
3 Press
RUN/STOP
4 You can view the analysis results on the
display.
ANALYSIS
The measurement will not be affected if you switch between the different
results provided.
70
to start the measurement.
SONET
RESULTS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

37718a omniber 718

Table of Contents