HP OMNIBER 718 37718A User Manual page 62

TIP:
Selecting Test Features
Using FEAC Codes
3 Choose the FEAC CODE TYPE.
4 Choose the MESSAGE from the choices displayed.
If you chose a DS1 message an additional field to the right of the DS1
MESSAGE is displayed. Position the cursor on this field and choose
or
ALL SINGLE CHANNEL
If you choose
SINGLE CHANNEL
from 1 to 28. Press
5 If is chosen, choose the REPEAT (TIMES) LOOP and
LOOPBACK
MESS, in the range 1 to 15.
6 If
ALARM/ STATUS
7 Choose TRANSMIT NEW CODE
selected FEAC message.
To View FEAC Messages
The received FEAC message can be viewed on the
52
.
use the EDIT keys to select a channel
when finished.
END EDIT
is chosen, choose the BURST LENGTH (TIMES).
BURST
or to transmit the
ON
RESULTS display.