Table of Contents
Advertisement
1. Install R2500 Receiver
The following section provides installation instructions for the R2500 wireless receiver.
Note: In order to establish correct pairing, the R2500 must be mounted and wired
before applying power to the T2500.
Figure1. R2500 front cover
Device connection
indicator lights
Connect button
(use paperclip
tip to depress)
INSTALLATION TIPS
▲
•
WARNING: Disconnect power before beginning installation.
!
•
Mount the R2500 on a wall near the HVAC equipment.
•
Choose indoor mounting locations free from obstructions.
•
CAUTION: Use copper wire only. Insulate or wire-nut all unused leads.
•
Use care to avoid electrostatic discharge to thermostat and receiver.
Figure 3.
Remove cover of
R2500.
© COPYRIGHT 2010 PECO, INC. ALL RIGHTS RESERVED. P/N 70161 3220-2216 Rev 0
4
Figure 2. R2500 backplate
Mounting slot
Wiring passage
Mounting slot
Advertisement
Table of Contents
