Peco WavePRO T2500 Installation Manual page 15

Advanced confi guration
Keypad Lockout: Select to allow restrictions to occupant access
Menu 9
Default: 0
Fan Program Mode: Select desired option
Menu 10
Default: 3
System Program Mode: Select to determine which system modes occupant can select
Menu 12
Default: 1
Front Panel Setback Mode Enable: Allows user to select "setback" as a system mode
Menu 14
Default: 0
Deadband Adjust: Select the changeover deadband value to prevent short cycling
between heating and cooling modes; adjustable to meet HVAC system requirements
Menu 17
Default: 3 °F
Pre-occupancy Purge: Select period of time fan will run prior to Wake and Day periods
Menu 25
Default: 0
Cycles Per Hour (CPH) for Cool Stage 1: Select Cycles Per Hour for Cool Stage 1;
0 disables cycling and thermostat becomes an ON/OFF control
Menu 30
Default: 3 CPH
© COPYRIGHT 2010 PECO, INC. ALL RIGHTS RESERVED. P/N 70161 3220-2216 Rev 0
0= No keypad lockout
1= Disables all buttons except ▲ and ▼ buttons.
2= Disables all buttons
Options: 0-2
1= ON: Fan is always on regardless of demand
2= AUTO: Fan is only on with heating or cooling demand
3= ON or AUTO: User can choose either selection
Options: 1-3
0= OFF, AUTO
1= OFF, HEAT, COOL, AUTO
2= OFF, HEAT, COOL
3= AUTO, HEAT, COOL
Options: 0-3
0= Disable
1= Enable
Options: 0-1
Options: 3-10 °F / 1.5-5 °C
Pre
Options: 0 to 3 hours
Options: 0 to 6 CPH
15
Selection:_________
Selection:_________
Selection:_________
Selection:_________
Selection:_________
Selection:_________
Selection:_________