Install Batteries In The T2500; Perform Advanced Confi Guration Of The T2500 Before Pairing; Establish A Wireless Connection - Peco WavePRO T2500 Installation Manual

3. Install batteries in the T2500

Batteries are recommended for the T2500 Thermostat. Insert two AA batteries (included)
in the T2500 Thermostat back compartment where indicated (see Fig. 10). Assure
batteries are inserted properly.
4. Perform advanced confi guration of the T2500 before pairing.
Perform advanced confi guration for thermostat before performing wireless pairing. (See
"Advanced Confi guration" section). Advanced confi guration allows you to customize
thermostat settings, such as temperature display, time and day display, programming
commands, and to create setpoints for scheduling different time periods. For more
information on using thermostat's buttons and features, refer to the "WavePRO Wireless
Programmable T2500 Thermostat & R2500 Receiver Operating Manual."

5. Establish a wireless connection

Perform wireless pairing after the R2500 is installed and advanced confi guration is
complete. For best results, perform wireless pairing before the T2500 Thermostat is
attached to the backplate.
NOTE: Wireless pairing is time sensitive. Pairing the T2500 with the R2500 must
be completed within two minutes after initiating the pairing process. (If you wait
longer than two minutes, restart the wireless pairing process at Step 1.)
Installation Tips
• Hold the T2500 Thermostat within 6-10 feet (3 m.) of the R2500 Receiver
during pairing.
• Step 3 (below) must be completed within two (2) minutes of completing
Step 2, initiating the fl ashing LEDs on the R2500.
© COPYRIGHT 2010 PECO, INC. ALL RIGHTS RESERVED. P/N 70161 3220-2216 Rev 0
11
Figure 10.
T2500 reverse view:
Insert two AA batteries
into reverse side.