Setting Do Not Disturb; Configuring Call Forwarding - Cisco 301 User Manual

Using the Web Interface

Setting Do Not Disturb

Setting Do Not Disturb

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
NOTE

Configuring Call Forwarding

STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business IP Phone SPA 30X User Guide (SIP)
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
To set Do Not Disturb:
Log in to the web interface.
In the Voice tab, click the User tab.
Under Supplementary Services, locate the DND Setting field.
Choose Yes to turn on Do Not Disturb.
At the bottom of the page, click Submit All Changes.
You can turn off Do Not Disturb from your phone or from the web interface.
Log in to the web interface.
In the Voice tab, click the User tab.
Under Call Forward, you can configure the following fields:
• CFWD All Dest—Forwards all calls to a single number that you enter.
• CFWD Busy Dest—Forwards all calls to another number when the phone is
busy. Enter the number to which to forward calls.
• CFWD No Ans Dest—Forwards calls to another number if there's no answer
at your phone. Enter the number to which to forward calls.
• CFWD No Ans Delay—Number of seconds to delay forwarding calls, if
there is no answer at your phone. Enter the number of seconds to delay.
At the bottom of the page, click Submit All Changes.
5
75