Setting Do Not Disturb; Configuring Call Forwarding - Cisco 509G User Manual

Using the Web Interface

Setting Do Not Disturb

Setting Do Not Disturb
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
NOTE

Configuring Call Forwarding

STEP 1
STEP 2
Cisco Small Business Pro IP Phone SPA 50X User Guide (SIP)
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
To set Do Not Disturb:
Log in to the web interface.
In the Voice tab, click the User tab.
Under Supplementary Services, locate the Do Not Disturb field.
Choose Yes to turn on Do Not Disturb.
At the bottom of the page, click Submit All Changes.
You can turn off Do Not Disturb from your phone or from the web interface.
Log in to the web interface.
In the Voice tab, click the User tab.
5
69