Technical Characteristics - Tecnoware EXA 1.1 Rack Mount User Manual

ENGLISH
8

Technical Characteristics

UPS EXA Rack Mount Model
Power
Technology
Nominal Input Voltage
Input Voltage Range
Input/Output Frequency
Input Frequency Range
Nominal Output Voltage
Output Voltage Regulation
(Normal mode)
Output Voltage Regulation
(Battery mode)
Output Inverter Waveform
Accepted Overload
Certifications
Efficiency
Battery Type
Number of batteries
Nominal Battery Voltage
Battery Specifications
Backup Time (typical)
Battery Charge Time (typical)
Audible Noise (at 1 meter)
Environmental Operative Specification
Computer Interface
UPS Management Software
SNMP Interface
Telephone and Modem protection
Output sockets
Dimension (W x H x D)
Net Weight
User's manual
1.1 1.5
1100 VA 1500 VA
(550 W) (750 W)
Line Interactive Pure Sinewave with Stabilizer
50/60 Hz (automatic selection)
Through AVR (Automatic Voltage Regulation)
110%-60sec / 120%-30sec / >120%-20msec
Standards: CEI EN 62040-1: 2008 (Low Voltage Directive) –
CEI EN 62040-2: 2006 (EMC Directive)
Lead acid, sealed, free maintenance
2
24 Vdc
12 Vdc – 7 Ah 12 Vdc – 7 Ah
6 cells 6 cells
12 min 10 min
Temperature: 0-40 °C - Humidity 0-95% (without condensation)
Included Software UPSilon 2000,
downloadable free of charge from www.tecnoware.com
4 UPS Output sockets (IEC type)
30,9 x 8,8 x 43,8 cm (2U)
14,5 Kg 15,5 Kg
Technical data may change without prior notice
10
2.2
2200 VA 2600 VA
(1100 W) (1300 W)
Single-phase 230 Vac
+20% / -25%
+/- 10%
Single-phase 230 Vac
+/- 5%
Sinewave
CE
96%
12 Vdc – 8 Ah 12 Vdc – 8 Ah
6 cells
8 min
4 hours
< 45 dBA
Altitude: max 3.000 mt
1 RS232 port and 1 USB port
Optional
RJ11 plugs included
6 UPS Output sockets (IEC type)
36 x 13,2 x 43,8 cm (3U)
16,5 Kg
UPS EXA 1.1-1.5-2.2-2.6-3.2 Rack Mount
2.6 3.2
3200 VA
(1600 W)
3
36 Vdc
12 Vdc – 8 Ah
6 cells 6 cells
8 min 6 min
18,5 Kg 19.5 Kg