Network Connection And Ip Assignment - Speco VIP2C1N Instruction Manual

Hd mini cube network camera

Hide thumbs Also See for VIP2C1N:

Table of Contents

2.2 Network Connection and IP assignment

The Network Camera supports the operation through the network. When a camera is first connected

to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the

"Speco Manager" utility on the CD. (Default IP 192.168.30.220)

Connect the Network Camera / device to the network and power up.

Start Speco Manager utility (Start>All programs>Speco Manager>Speco Manager), the main

window will be displayed, after a short while any network devices connected to the network will

be displayed in the list.

Select the camera on the list and click right button of the mouse. You can see the pop-up menu

below.

Select Assign IP. You cam see a Assign IP window. Enter the required IP address.

Note: For more information, refer to the Speco Manager User's Manual.

Table of Contents

Vip2c1p