Network Connection And Ip Assignment - Speco VIP2C1P Quick Installation Manual

Notes:
1. WPS may not work if your AP is configured with a "hidden" SSID.
2. If any WPS-enabled AP is not detected, the camera will search APs for 60 seconds after
pressing the WPS button, and if the camera still can not detect an AP after 1 minute, the
wireless setup will be cancelled.
3. If a camera is assigned with a fixed IP outside the AP's network segment, wireless setup will
fail.

2.2 Network Connection and IP assignment

The Network Camera supports the operation through the network. When a camera is first connected
to the network it has no IP address. So, it is necessary to allocate an IP address to the device with the
"Speco Manager" utility on the CD. (Default IP 192.168.30.220)
1. Connect the Network Camera / device to the network and power up.
2. Start Speco Manager utility (Start>All programs>Speco Manager>Speco Manager), the main
window will be displayed, after a short while any network devices connected to the network will
be displayed in the list.
5