Network Camera Setup; Basic Configuration - Speco VIP2C1N Instruction Manual

3.5 Network Camera Setup

This section describes how to configure the network camera, and is intended for product
Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access
to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration.
You can configure the network camera by clicking Setup in the top right-hand corner of the Live View
page. Click on this page to access the online help that explains the setup tools

3.5.1 Basic Configuration

You can see the device information in this information page.
When accessing the Network Camera for the first
time, the "Admin Password" dialog appears.
Enter your admin name and password, set by the
administrator.
Note: If the password is lost, the Network
Camera must be reset to the factory default
settings. See "3.8 Resetting to the Factory
Default Settings".
16