Preparing For Configuration; Testing - Avaya G350 Upgrade And Service Manual

Adding trunks

Preparing for configuration

Preparing for configuration
Before the software configuration for the new trunk takes place, gather the following information:
•
slot and port number on the Avaya G350 Media Gateway to which the trunk connects
•
telephone number of the trunk
In addition, you may need to connect a modem or a laptop computer to the Avaya G350 Media Gateway.
See Preparing for configuration
Be ready to assist the technician that is performing or supervising the configuration during the
configuration.

Testing

After installation and configuration of the trunk is complete, test the trunk. To test the trunk:
1
Make outgoing calls from the trunk. Ask the technician that is performing or supervising the
configuration for instructions how to access the trunk. Make sure you can make both an internal
(within the local network) and an external (outside of the local network) call.
2
Use a cellular telephone to make a call into the G350 trunk line.
44
on page 17.
Upgrade and Service Guide for the Avaya G350 Media Gateway
June 2004