Enabling A Usb Modem Connected To The Avaya S8300 Media Server - Avaya G350 Upgrade And Service Manual

Preparing for configuration
Enabling the modem
Enabling a USB modem connected to the
Avaya S8300 Media Server
If you plan to connect the modem to one of the USB ports on the front panel of the S8300 Media Server,
you can enable the port and the modem via the Avaya Maintenance Web Pages.
To connect and enable the modem:
1
Connect the USB modem to a working telephone line.
2
Connect the USB modem to one of the USB ports on the S8300 module.
3
Connect the laptop computer to the Services port on the S8300 module. Use a standard Ethernet
crossover cable.
4
Configure the network settings on the laptop, according to the following tables:
Table 1: TCP/IP Settings
Setting
IP Address
Subnet Mask
DNS
WINS Servers
Table 2: Internet Browser Settings
Setting
Proxy Server
The names of the dialog boxes and buttons vary on different operating systems and browser
releases. Use your computer's help system if needed to locate the correct place to enter this
information.
30
Value
192.11.13.5
255.255.255.252
disable
do not use (clear out any values)
Value
disable
Upgrade and Service Guide for the Avaya G350 Media Gateway
June 2004