Updating Files; Updating Scripts; Updating Defaults - Analog Devices ADV7604 User Manual

5. Updating Files

interface. A script contain lists of I2C writes for each supported video mode. A default
contains details of the bits in each register map of the target device.
Analog Devices Inc. reserves the right to update any script or default as and when is
required. Should this be the case, please use the following procedure to update either a
script or a default.
Note: you may need administrative privileges on any machine you are about to undertake
these steps on.

5.1 Updating Scripts

If provided with a new script, please use the following procedure:
 Close ATV Benchtop
 Open the Program Files folder on the c:/
 Open the Analog Devices folder
 Open the ATV Benchtop folder
 Open the Setup_Files folder
 Copy the new script file into this directory.
 Restart ATV Benchtop

5.2 Updating Defaults

If provided with a new default, please use the following procedure:
 Close ATV Benchtop
 Open the Program Files folder on the c:/
 Open the Analog Devices folder
 Open the ATV Benchtop folder
 Open the Defaults folder
 Copy the new default file into this directory.
 Restart ATV Benchtop
Pr. A June 2010
© 2010 Analog Devices, Inc. All rights reserved.
Analog Devices B.V. 12 of 27