Factory Default - Eiki LC-XNS2600 Owner's Manual

Expand
(3) When DHCP is set On, IP address,
Subnet, Gateway and DNS will be
obtained automatically, press OK at
"Set" to confirm the parameters.
When DHCP is set Off, press OK button
to enter IP address, then press OK
button to enter Subnet, Gateway and
DNS respectively, press OK at "Set" to
confirm the parameters.

Factory default

This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.
48
Network setting
DHCP
IP address
Subnet
Gateway
DNS
Adjust Select
Network setting
DHCP Off
IP address 0
Subnet 0
Gateway 0
DNS 0
Select
Move
On
Set Cancel
Back
0 0 0
0 0 0
0 0 0
0 0 0
Set Cancel
Back