System - Eiki LC-XNS2600 Owner's Manual

Display

System

Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan
system and Auto PC Adjustment. If a computer is selected as a signal source, the projector
automatically detects the signal format and tunes to project proper images without any additional
setting.
One of the following messages may appear
when:
When the projector cannot
Auto
recognize the connected signal
conforming to the provided
computer system, Auto is displayed
on the System menu box and the
Auto PC Adj. function works to
display proper images. If the image
is not projected properly, a manual
adjustment is required.
There is no signal input from
-----
computer. Check the connection
between your computer and
projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the remote control to
display the screen menu. Press  button
to select the Display icon, and press OK
button.
2 Press  button to select System and press
OK button.
3 Press  button to select your required
system, and press OK button.
Note:

When HDMI is selected, System menu for
computer is disable.
34
Screen Size
PC adjust
Keystone
Project Mode
Display
Menu Position
Background Display
Color adjust
System
Setting
Expand
Info.
Move
System
System for computer signal
PC adjust
1024x768@60

1366x768@60
Display
----
----
Color adjust
----
Setting
Expand
Info.
Adjust
Normal
Stored
Front
Center
Blue
1024x768@60
Next Exit
System RGB(PC1)
Select Back