Security - Eiki LC-XNS2600 Owner's Manual

Security

This function allows you to use the PIN code
lock and PIN code change functions to set the
security for the projector operation.
PIN code lock
This function prevents the projector from
being operated by unauthorized persons
and provides the following setting options for
security.
Off ............Unlocked.
On ........... Enter the PIN code every time
turning on the projector.If you
want to change PIN code lock
setting or PIN code,you must
enter the PIN code. The orignal
PIN code is "111".
If you want to change the PIN code lock
setting, press OK button, then PIN code dialog
box appears.
Enter PIN code
Press  button to select a number, and
then press OK button to enter this number,
automatically move the cursor to next box. If
you fixed an incorrect number, press MENU
button to reset it.
Repeat the steps to complete entering a three-
digit number.
After entering the three-digit number, move the
cursor to "OK", and press OK button, then you
can start to operate the projector.
If you entered an incorrect PIN code, the "PIN
code" and the number (***) turn red, it will be
reset automatically within one second. Enter
the correct PIN code all over again.
Change PIN code lock setting
Press  button to select On or Off, then
press OK button.
PIN code change
The PIN code can be changed to your desired
three - digit number. Press  button to
select PIN code change. Pin code dialog
box appears, Press  button to enter the
correct code. The New PIN code input dialog
box appears. Set a new PIN code.
Security
PC adjust
PIN code lock
PIN code change
Display
Color adjust
Setting
Expand
Info.
Move
Caution:
When you have changed the pin code, write
down the new pin c ode in c olumn of the
pin code no. memo on Page 66, and keep
it securely. Should the pin code be lost or
forgotten, the pin code setting can no longer
be changed.
Expand
Security
Off
Next Back
45