Expand; Language; Auto Setup - Eiki LC-XNS2600 Owner's Manual

The projector has Expand menu that allows you to set the other various expand functions
described as follows.
1 Press MENU button on the remote control to
display screen menu. Press  button to
select Expand, then press OK button.
2 Press  button to select the item you
want to set, press OK button.
3 Press  button to adjust the item, then
press OK button.

Language

Press button to select the language for
screen manual.
This projector provides 20 lanuages below:
English, Persian, Russian, Finnish, Dutch,
Italian, Portuguese, French, German, Thai,
Vietnamese, Japanese, Korean, Spanish,
Indonesian, Turkish, Arabic, Afrikaans,
Traditional Chinese, Simplified Chinese.

Auto setup

Press AUTO button on the remote control
to execute Input search and Auto PC adj.
functions.
Input search
Allows you to automatically detect input
signals. It stops when a signal is found.
Press  button to select an option
below:
Off........Disabled.
On........Enabled. This function is used to
detect input signals automatically
and stops when finding a signal.
Auto PC adj.
On........Press the AUTO button on the
remote control to enable Auto PC
adj. function automatically.
Off........Cancel Auto PC adj. function.
Auto keystone
Off.........Disable auto keystone function.
Manual.. Press the AUTO button on the
top control or remote control to
enable Auto keystone function.
Auto...... Correct keystone distortion
according to the slope of the
projector.
Expand menu
Language
PC adjust
Auto setup
Logo
Display
Security
Power management
Color adjust
Filter counter
Setting
Test pattern
Network

Expand

Factory default
Info.
Move
Auto setup
PC adjust
Input search
Auto PC adj.
Display
Auto keystone
Color adjust
Setting
Expand
Info.
Move

Note:
- Only the last selected input source can be
detected.
- If the INPUT button on the top control or on the
remote control is pressed during Input search is
in progress, Input search will stop and go back to
the previous input signal.
- Input Search and Auto PC Adj. cannot be set Off
at the same time.
- Fine sync., Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adj. function.
When the image is not provided properly with this
operation, manual adjustments are required.
Expand
Next Exit
Auto setup
On
On
Auto
Next Back
43