1.Standard drive bay.
2.HDD bay.
3.Front chassis door.
The rear section includes:
1.Backplane.
2.Power supply with two fans.
3.Bracket for COM port
2.3 The HDD Drive Bay
The HDD drive bay of the AIMB-C300 can hold up to two hard disk.
Installing disk drives
1.Remove the top cover.
2.Detach the two screws holding the HDD bay.
3.Lift off the HDD bay.
4.Insert Hard Disks into their proper locations in the drive bay and secure
them with the screws provided.(please refer to figure 2-2).
5.Connect the disk drive power and signal cables.
6.Install the standard drive bay and secure the top front cover with the
two screws.(please refer to figure 2-3)
Figure 2.2: HDD drive bay
7
Chapter 2