Setting The Camera Channel (Optional); Pairing The Camera To Receiver (Optional) - Response CWD3 Installation And Operating Instructions Manual

3.3 Setting the Camera Channel (Optional)

The wireless cameras will be supplied preset to channel 1 and channel 2.
The wireless monitor supports up to 4 wireless cameras. Follow the step below to set or
change the monitor channel of the camera. If you are adding another camera to link with the
supplied monitor in this kit, then ensure its channel is set to a different channel to the existing
camera(s).

3.4 Pairing the Camera to Receiver (Optional)

Follow the steps in 6.1 Camera Setup (p.16) SETUP section to set or change the channel
of the camera. If you are adding another camera to link with the supplied receiver in this kit,
then ensure its channel is set to a different channel to the existing camera(s).
Trouble Shooting page 9 or call the
Customer Helpline available Monday to
Friday 9.00 am to 5.00pm.
www.friedland.co.uk
Pairing Key
10
YOUR HELPLINE
0844 736 9149