Response CWD3 Installation And Operating Instructions Manual page 22

(1) Starting / Time:
(2) The type of recorded file (Schedule / Motion / Manual) is indicated by:
NOTE: The channel indicator 1, 2, 3, 4 in SOLID square indicate the following:
- In MOTION (M): channel triggered.
- In SCHEDULE (S): channel selected by user.
- In MANUAL (C): channel selected by user.
To playback recorded file, use ◄► to highlight RECORDED FILE.
Press MENU to confirm selection and playback selected file.
NOTE: By default, playback display will be QUAD (displaying images of all cameras paired).
■ 田 □1 □2 □3 □4 = All channel playback
For single camera display, press MENU once after playback started to PAUSE.
Use ◄► to select from channel to channel.
Channel indicator (bottom left screen) will indicate the channel number selected.
□ 田 ■1 □2 □3 □4 = Channel 1 playback in full screen
□ 田 □1 ■2 □3 □4 = Channel 2 playback in full screen
□ 田 □1 □2 ■3 □4 = Channel 3 playback in full screen
□ 田 □1 □2 □3 ■4 = Channel 4 playback in full screen
NOTE:
(1) For other control functions available during playback mode, please refer to section 4
- RECEIVER AND IR REMOTE PANEL INTRODUCTION (p.12).
(2) The CD provided is for playing back the recorded file(s) from the memory card on a
PC.
Start Time = PM10:33
End Time = PM10:43
= Channel 1 is SCHEDULE recorded file
= Channel 1 is MOTION recorded file
=Channel 1, 2, 3 and 4 are MANUAL (C = Continous) recorded files
22