Response CWD3 Installation And Operating Instructions Manual page 25

(Display QUAD mode)
(10 sec Intervals)
Select SYSTEM SETUP, press MENU to enter.
Use ▲▼ to select MULTI CHANNELS IDLE DISPLAY.
Use ◄► to select: DISPLAY QUAD DURING IDLE / AT 5 SEC INTERVALS / AT 10 SEC
INTERVALS / AT 15 SEC INTERVALS, press MENU to confirm selection.
Press ESC to save and exit.
NOTE:
(1) Camera ON/OFF setting in CAMERA SETUP section will affect which
camera(s) can be displayed during IDLE DISPLAY.
(2) Audio (single channel at anytime) will be available during QUAD mode (by
default on channel 1 or the next available channel with camera paired to system),
single FULL screen mode (auto switch to channel viewing at the time), or channel
triggered by motion.
(3) Audio channel will stay connected until channel switched.
(4) If set to 5/10/15 sec. interval then select SCAN ACTIVATED CAMERAS (p.27)
to achieve this display mode.
YOUR HELPLINE
0844 736 9149
Trouble Shooting page 9 or call the
Customer Helpline available Monday to
Friday 9.00 am to 5.00pm.
www.friedland.co.uk
25
(5 sec Intervals)
(15 sec Intervals)