5.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
Power, Hardware Connections, and LED
•
Accessing the Utility
•
Internet Access
5.2 Power, Hardware Connections, and LED
The WAH1004 does not turn on. The LED is not on.
Make sure the WAH1004 is correctly installed (refer to your Quick Start Guide).
1
Remove and plug in the WAH1004 to restart it.
2
Restart the computer to which the WAH1004 is attached.
3
If the problem continues, contact the vendor.
4
The LED does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections. See the Quick Start Guide.
2
Remove and plug in the WAH1004 to restart it.
3
If the problem continues, contact the vendor.
4
C
H A PT ER
Troubleshooting
WAH1004 User's Guide
23
Section 1.4 on page
7.
5