Components And Parts To Save - DEC 3000 500 Owner's Manual

Unpacking a Workstation System
The parts shown in Figure 2–6 can be stored for use later. You
Save These
Parts for Later do not need them for system installation.
Figure 2–6 Components and Parts to Save
Network
Label
Antistatic
Wrist Strap (2)
Screwdriver
For Users in To comply with certain international standards, Digital includes
Germany German regulatory information (sometimes referred to as the
FTZ card) in every system and monitor box. Disregard this
material if your system is not located in Germany.
For Users in The yellow Austel warning label, part number 36-39563-01,
Australia attached to the shipping container and system unit, is required
by the country of Australia for systems that provide ISDN
functionality but are not yet certified for use in Australia.
Disregard these labels if your system is not located in Australia.
2–10 Preparing to Install the System
10BASE-T Loopback
Connector
Modem Loopback
Connector
Printer Port
Terminator
MLO-010457