Chapter 1
Overview
Port Aggregation or Redundancy Configuration
The port aggregation or redundancy configuration
or backup redundancy communications between two LANs. Port aggregation or increased bandwidth
occurs when both wireless links are used to simultaneously pass Ethernet traffic. Backup communication
redundancy can be achieved with this configuration when one wireless bridge link is used only if the
other wireless bridge link fails.
Figure 1-4
Point-to-Multipoint Configuration
The point-to-multipoint configuration
LAN networks.
Figure 1-5
OL-4072-04
Port Aggregation or Redundancy Bridge Configuration
Bridge
Bridge
(Figure
Point-to-Multipoint Bridge Configuration
Bridge
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
(Figure
1-4) is used to provide increased bandwidth
Bridge
Bridge
1-5) connects the main LAN network to multiple remote
Bridge
Bridge
Network Configuration Examples
1-7