Cisco Aironet 1400 Series Hardware Installation Manual page 25

Chapter 1 Overview
Table 1-1 Bridge, Power Injector, and Power Module Specifications (continued)
Category
Weight
Input Voltage
Power Consumption
Output Power
Frequency
Wireless modulation
Subcarrier modulation
Data rates
Non-overlapping
channels
Antenna
(Depending on the
regulatory region)
OL-4072-04
Bridge
Integrated antenna configuration:
12 lbs (5.44 kg)
External antenna configuration:
11 lbs (4.99 kg)
48 VDC nominal (supplied by dual-coax cables)
40 VDC (minimum)
50 VDC (maximum)
32W (typical)
41W (maximum)
Regular power version:
24, 23, 22, 21, 18, 15, 12 dBm
Low power version:
16, 13, 12, 10, 9, 8, 7, 4 dBm
(Depending on the regulatory region)
UNII 3—5.725 to 5.825 GHz
(Depending on the regulatory region)
Coded Orthogonal Frequency Division Multiplexing
(COFDM)
BPSK (6 Mbps and 9 Mbps)
QPSK (12 Mbps and 18 Mbps)
16-QAM (24 Mbps and 36 Mbps)
64-QAM (48 Mbps and 54 Mbps)
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
4
Integrated antenna
22.5-dBi patch array
20-dBi patch array
External antennas:
9-dBi omnidirectional
9.5-dBi sector
28-dBi dish
(Depending on the regulatory region)
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
Bridge Specifications
Power Injector and Power Module
Power injector—1.4 lbs (0.6 kg)
Power Module—1.0 lbs (0.5 kg)
Power injector—48 VDC (± 2 VDC)
Power module:
90 to 264 VAC at 47 to 63 Hz
2.5W (maximum)
Power injector—45W (maximum) supplied
to the bridge through dual-coax cables
Power module—60W (maximum)
—
—
—
—
—
—
1-9