Table of Contents
Advertisement
The mount cradle has the following physical features:
A, C, E, G- Antenna port
B- Grounding post
D- GPS Antenna port
F- Mounting slots
H- Ethernet/ Console ports
I- Positive reset cap (Covers access to rest button)
J- LED indicator
LED Indicator
The CW9163E is equipped with a multi-color LED on the bottom edge of the unit to convey information about system functionality and performance:
•
Orange - AP is booting (permanent Orange suggests hardware issue)
•
Rainbow - AP is initializing/scanning
•
Blinking Blue - AP is upgrading
•
Green - AP in Gateway mode with no clients
•
Blue - AP in Gateway mode with clients
•
Blinking Orange - AP can't find uplink
The CW9163E may be operated in "Run Dark" mode for additional security and to reduce the visibility of the access point. In this mode, the LED will not be
illuminated. This mode may be enabled through the Meraki Dashboard.
Ethernet Port
The CW9163E features one PoE 2.5 Gbps Ethernet port which can be sealed with a cable gland for outdoor operation.
The ethernet port accepts 802.3at power and should be used as the primary uplink to your LAN/WAN.
4
Advertisement
Table of Contents
