Chapter 1 Overview; Bridge Specifications - Cisco Aironet 1400 Series Hardware Installation Manual

Overview
The Cisco Aironet 1400 Series Wireless Bridge (hereafter called the bridge) is a wireless device
designed for building-to-building wireless connectivity. Operating in the 5.8-GHz UNII 3 band (5725 to
5825 MHz), derived from the 802.11a standard, the bridge delivers 6 to 54 Mbps data rates without the
need for a license. The bridge is a self-contained unit designed for outdoor installations, providing
differing antenna gains as well as coverage patterns. It supports both point-to-point and multipoint
configurations.
The bridge uses a browser-based management system, but you can also configure the bridge using Cisco
IOS commands or Simple Network Management Protocol (SNMP).
This chapter provides information on the following topics:
Key Features, page 1-2
•
Network Configuration Examples, page 1-6
•
Bridge Specifications, page 1-8
•
OL-4072-04
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
C H A P T E R
1
1-1