Maximum Power Levels - Cisco Aironet 1400 Series Hardware Installation Manual

Bridge Specifications
Table 1-1 Bridge, Power Injector, and Power Module Specifications (continued)
Category
Safety
Electromagnetic
Compatibility (EMC)
Radio Type Approvals
RF Exposure

Maximum Power Levels

Each regulatory region limits the equivalent isotropic radiated power (EIRP) that can be supported
within their region. This restricts the bridge output power that can be used with the bridge antennas and
affects the resulting operating range of the bridge (for additional information refer to
"Channels and Maximum Power Levels."
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03
1-10
Bridge
Bridge:
UL 60950
CSA C22.2 No. 60950
IEC 60950
EN 60950
Bridge:
FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
EN 55022 Class B
EN 55024
EN 301.489-1
EN 301.489-4
Bridge radio:
FCC Part 15.207, 15.407, and15.209 Class B
ICES-003 Class B (Canada)
Canada DGTP-010
FCC Bulletin OET-65C
Industry Canada RSS-102, RSP100, and
RSS 210 Issue 5
No harmonized standard exists for this
Note
frequency in the European Union regulatory
region. The radio spectrum matters are
covered in a Technical Construction File per
R&TTE Directive 99/5/EC.
Bridge antenna:
AIR-ANT58G28SDA-NAironet
AIR-ANT58G10SSA-NAironet
AIR-ANT58G9VOA-NAironet
For Ireland the bridge satisfies EN50835 for
Note
RF exposure.
Chapter 1
Power Injector and Power Module
Power injector and power module:
UL 60950
CSA C22.2 No. 60950
IEC 60950
EN 60950
The power injector and the power
Note
module must be used in an indoor
environment.
Power injector and power module:
FCC Part 15.107 and 15.109 Class B
ICES-003 Class B (Canada)
EN 55022 Class B
EN 55024
—
—
Overview
Appendix C,
OL-4072-04