Installation Overview; Performing A Preinstallation Configuration (Optional) - Cisco Catalyst IW9167I Hardware Installation Manual

Installation Overview

•
•
•
•
•
•
•

Performing a Preinstallation Configuration (Optional)

The following procedures describe the processes to ensure that your AP installation and initial operation go
as expected.
Note
The following illustration shows the preinstallation configuration setup:
Performing a Preinstallation Configuration (Optional), on page 15
Preinstallation Checks and Installation Guidelines, on page 17
Mounting the Access Point, on page 18
Attaching a Power Adapter, on page 30
Grounding the Access Point, on page 33
Powering the Access Point, on page 34
Connecting Data Cables, on page 39
Performing a preinstallation configuration is an optional procedure. If your network controller is properly
configured, you can install your AP in its final location and connect it to the network from there.
Cisco Catalyst IW9167I Heavy Duty Access Point Hardware Installation Guide
3
C H A P T E R
15