On Line Operation; Reset Operation; When Using The Kb-80-Qm Optional Keyboard - TEC B-450 SERIES User Manual

5. ON LINE OPERATION

5. ON LINE OPERATION

5.1 RESET OPERATION

5.1.1

When using the KB-80-QM optional keyboard

This operation restores the printer to the initial status.
• Sample operation
Turn the power ON.
O N L I N E
O N L I N E
P A U S E
O N L I N E
< 1 > R E S E
O N L I N E
NOTES: 1. If the [RESTART] key is released within 3 seconds in the pause state, the printer will resume
printing without displaying the reset menu.
2. If the [RESTART] key is released within 3 seconds in the error and pause state, the printer
will remain in error. However, in case of a communication error or command error, the
printer will restore to the initial status.
Key Function Table
Key Name
[FEED] Key
[RESTART] Key
[PAUSE] Key
PAUSE
5 2
RESTART
T
PAUSE
Feeds a piece of paper.
Feeds the paper to the print start position. When printing is
performed with the print position misaligned, the printer cannot
print data on a proper position, therefore, feed one or two pieces of
paper to set the paper to the proper position before printing.
Also sets the feed speed adjustment value.
Restarts the label issue after a pause or an error.
Restores the printer to the status after turning the power ON.
Issues the label while the printer is on-line.
Pauses the label issue.
(1) The printer is in stand-by or printing.
(2) Press the [PAUSE] key on the printer. (When the
KB-80-QM optional keyboard is connected, press
and hold the [PAUSE] key for at least 3 seconds.)
(3) The printer enters the pause state.
(4) Press and hold the [RESTART] key for at least 3
seconds.
(5) A reset menu is displayed.
(6) Press the [PAUSE] key.
(7) The printer is restored to the initial state.
Function
5-1
EO18-33003A
5.1 RESET OPERATION