Paper (Label/Tag) Specifications; Ribbon Specifications; Option - TEC B-450 SERIES User Manual

2. SPECIFICATIONS

2.3 PAPER (LABEL/TAG) SPECIFICATIONS

Item
Span of one label/tag
Label length
Width including backing paper
Label width
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Black mark length (Label)
Outer roll diameter
Thickness
2.4 RIBBON SPECIFICATINS
Type
Width
Length
Outer diameter
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and
ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE PAPER
AND RIBBON.

2.5 OPTION

Option Name
Cutter module
Strip module
Programmable
Keyboard
module
Expansion I/O
interface board
Centronics
interface board
LAN I/F Board
(TS model only)
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC represen-
tative or TOSHIBA TEC Head Quarter.
Label dispensing mode
Label
Tag
Spool type
60 mm ~ 110 mm
(300 m)
Ø65 mm (max.)
Type
B-7204-QM This cutter module uses a rotary cutter. It cuts backing
paper of labels and tag paper automatically in "stop and
cut" mode.
B-7904-H-QM This strip module strips the label from the backing paper
with the take-up block and strip block. When the
rewinder guide plate is attached, the tag paper and label
with backing paper are wound.
KB-80-QM This module is an external intelligent keyboard unit.
B-7704-IO-QM Installing this board in the printer allows a connection with
an external device with the exclusive interface, such as
the Keyboard module.
B-7704-C-QM Installing this board in the printer allows a connection with
a PC by the Centronics parallel interface.
B-7704-LAN- This board enables the printer to be used in a LAN
QM network by using the command language.
Batch mode Strip mode
25.4 ~ 999.0
15.0 ~ 999.0
23.4 ~ 997.0
13.0 ~ 997.0
25.4 ~ 114.0
22.4 ~ 111.0
2.0 ~ 20.0
2.0 ~ 20.0
2.0 ~ 20.0
10.0 ~ 105.7
15.0 ~ 500.0
15.0 ~ 500.0
MIN. 2.0
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.13 ~ 0.17
0.1 ~ 0.17
Use
2-2
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
[Unit: mm]
Cut mode
Label: 37.0 ~ 999.0
Tag: 25.4 ~ 999.0
31.0 ~ 993.0
6.0 ~ 20.0
1.0
0.1 ~ 0.17
EO1-33006