2. MAJOR UNIT REPLACEMENT
2.2.2
Stepping Motor
Be careful not to get burned when handling the stepping motor
since it becomes very hot while printing.
1) Remove the two PT-3x10 screws to detach the stepping motor ass'y.
2) Remove the two SMW-3x6 screws to detach the stepping motor.
3) Replace the stepping motor with a new one, and then reassemble in the reverse order of removal.
WARNING!
PT-3x10 Screw
SMW-3x6 Screw
Stepping Motor
Stepping Motor Ass'y
2-5
EO18-33003A
2.2 REPLACING THE MOTOR
Fig. 2-6
Fig. 2-7