Installation Procedure For The Optional Equipment; Cutter Module (B-7204-Qm) - TEC B-450 SERIES User Manual

3. INSTALLATION PROCEDURE FOR THE OPTIONAL EQUIPMENT

3. INSTALLATION PROCEDURE FOR THE OPTIONAL
EQUIPMENT

3.1 CUTTER MODULE (B-7204-QM)

1. Disconnect the power cord before installing the cutter module.
2. Be careful not to injure your fingers when installing the cutter module.
3.1.1 Packing List
All the following parts are supplied with the kit. Make sure you have all items shown below.
Cutter Unit (1 pc.)
Cutter Cover (1 pc.)
3.1.2 Installation Procedure
1) Turn the power off.
2) Open the top cover and remove the two PT-3x10 screws.
Top Cover
WARNING!
Cutter Harness (1 pc.)
Installation Manual (1 pc.)
3-1
3.1 CUTTER MODULE (B-7204-QM)
Double Sems Screw SMW-3x8 (1 pc.)
Cutter Ground Plate B (1 pc.)
Ferrite Core (1 pc.)
Allen Key (1 pc.)
PT-3x10 Screw
EO18-33003A
Fig. 3-1
Fig. 3-2