Print Tone Fine Adjustment (Thermal Transfer Print) - TEC B-450 SERIES User Manual

6. DIAG. TEST OPERATION
6.3.5

Print Tone Fine Adjustment (Thermal Transfer Print)

Press the [C] key.
NOTES: 1 Holding the [ ↓ ] key or [ ↑ ] key down for more than 0.5 seconds enables a fast forward.
2. Max. fine adjustment ± 10 steps = key fine adjustment value ( ± 10 steps) + PC fine
adjustment value ( ± 10 steps)
When the value reaches the maximum, the value remains unchanged even if the
subsequent fine adjustment is performed.
3. A changed print tone value is stored in keyboard memory by pressing the [ → ] key.
Power off
Turn on the power while
holding down the [SHIFT]
key.
< 1 >
D I A G .
Press the [↓] key.
< 2 >
P A R A M E T E R
Press the [→] key five times.
T O N E A D J .
Press the [↓] or
[↑] key to fine adjust
the Print tone.
(See NOTE 1.)
Press the [ENTER] key.
S E T O P R I N
T
Y E : [ E N T ]
S
Press the [ENTER] key or [C] key.
S E T
↓
< T > + 0
[ ] key:
↑
[ ] key:
Press the [→] key.
Continued on Section 6.3.6
T E R ?
Print Tone Fine Adjustment
(Thermal Direct)
N O : [ C ]
6-22
EO18-33003A
6.3 PARAMETER SETTING MODE
↓
Pressing the [ ] key one time
is a -1 step change, up to -10
steps. (See NOTE 2.)
↑
Pressing the [ ] key one time
is a +1 step change, up to +10
steps. (See NOTE 2.)