Check Points Of Every 100 Hours - Kubota WSM B1710 Workshop Manual

B1710 · B2110 · B2410 · B2710, WSM

[4] CHECK POINTS OF EVERY 100 HOURS

Checking Wheel Mounting Screws and Nuts Tightening Torque
CAUTION
• Never operate tractor with a loose rim, wheel, or axle.
• Any time bolts and nuts are loosened, retighten to specified
torque.
• Check all screws and nuts frequently and keep them tight.
1. Check wheel screws and nuts regularly especially when new. If
there are loosened, tighten as follows.
Rear wheel hub
mounting nut
Cotter setting bolt and
nut
Tightening
torque
Front wheel mounting
nuts
Rear wheel mounting
nuts
(1) Cotter Setting Bolt and Nut
(2) Front Wheel Mounting Nut
(3) Rear Wheel Mounting Screw and
Nut
Changing Engine Oil
1. See page G-12.
Checking Clutch Pedal Free Travel
1. See page G-14.
G-17
G GENERAL
108 to 125 N·m
11.0 to 12.8 kgf·m
B1710
79.6 to 92.6 ft-lbs
B2110
123 to 147 N·m
B2410
12.6 to 15.0 kgf·m
91.1 to 108.5 ft-lbs
B1710
77 to 90 N·m
B2110
7.9 to 9.2 kgf·m
B2410
57.2 to 66.5 ft-lbs
B2710
108 to 125 N·m
B2710 11.0 to 12.8 kgf·m
79.6 to 92.6 ft-lbs
A : B1710, B2110, B2410
B : B2710
W10231260
W10171330
W10385710
KiSC issued 11, 2006 A