Disassembling And Assembling - Kubota WSM B1710 Workshop Manual

B1710 · B2110 · B2410 · B2710, WSM

(2) Disassembling and Assembling

(A) Separating Power Steering Assembly
Hood, Side Cover and Front Grille
1. Open the hood (1) and remove the front grille (3).
2. Disconnect the head light connectors and remove the hood and
side covers (2).
(1) Hood
(2) Side Cover
Battery and Horn
1. Disconnect the battery cords (2) and horn connector (1).
NOTE
• When disconnecting the battery cords, disconnect the
grounding cord first. When connecting, positive cord first.
(1) Horn Connector
Steering Wheel
1. Remove the steering wheel cap.
2. Remove the steering wheel mounting nut and remove the
steering wheel with a steering wheel puller (Code No. 07916-
51090).
(When reassembling)
Steering wheel mounting
Tightening torque
nut
Meter Panel and Panel Under Cover
1. Open the meter panel (1) and disconnect the meter panel
connector (2) and hour-meter cable (3). Then remove the meter
panel.
2. Disconnect the combination switch connector (8), main switch
connector (4), hazard switch connector (6) and position light
switch connector (7).
3. Tap out the spring pin and remove the hand accelerator lever (5).
4. Remove the panel under cover (9).
(1) Meter Panel
(2) Meter Panel Connector
(3) Hour-meter Cable
(4) Main Switch Connector
(5) Hand Accelerator Lever
7-S9
STEERING
(3) Front Grille
W10156940
(2) Battery Cord
W10424310
29.4 to 49.0 N·m
3.0 to 5.0 kgf·m
21.7 to 36.2 ft-lbs
W10158450
(6) Hazard Switch Connector
(7) Position Light Switch Connector
(8) Combination Switch Connector
(9) Panel Under Cover
W10177730
KiSC issued 11, 2006 A