Checking, Disassembling And Servicing; Checking And Adjusting - Kubota WSM B1710 Workshop Manual

B1710 · B2110 · B2410 · B2710, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] CHECKING AND ADJUSTING

Checking Clutch Pedal Free Travel
CAUTION
• When checking, park the tractor on flat ground, apply the
parking brake, stop the engine and remove the key.
1. Slightly depress the clutch pedal and measure stroke "A" at top
of stopper bolt (3).
2. If the measurement is not within the factory specifications, loosen
the lock nut and adjust the clutch pedal rod (5) length.
3. After adjusting it, measure total stroke "B" between stopper bolt
(3) and clutch housing (6).
4. If the measurement is not within the factory specifications, adjust
it with the clutch pedal stopper bolt (3).
5. And at the same time, adjust the clearance "C" between safety
switch (1) and clutch pedal rod (5).
NOTE
• After adjustment, sure the stopper bolt with the lock nut (4).
Clutch pedal free travel
on stopper bolt stroke Factory spec.
"A"
Reference :
Clutch pedal free travel "L" on top of clutch pedal
Clutch pedal total stroke
Factory spec.
"B"
Clearance "C" Factory spec.
(1) Safety Switch
(2) Clutch Rod
(3) Stopper Bolt
2-S4
CLUTCH
1.0 to 1.5 mm
0.039 to 0.059 in.
20 to 30 mm
0.78 to 1.18 in.
8.0 to 9.0 mm
0.31 to 0.35 in.
1.5 to 2.5 mm
0.059 to 0.098 in.
(4) Lock Nut for Stopper Bolt
(5) Clutch Pedal Rod
(6) Clutch Housing
W10115880
KiSC issued 11, 2006 A